Insertion Loss Research Articles

A super-compact wideband bandpass filter using capacitor-loaded coupled lines

Abstract A wideband bandpass filter (BPF) using capacitor-loaded coupled lines is proposed with super-compact circuit size and very simple structure. By loading three lumped capacitors in parallel to three same pairs of coupled lines, three transmission poles and four transmission zeros can be achieved and they can be calculated by input admittance derivation. To verify the design, a wideband BPF prototype with center frequency at 1.34 GHz is fabricated, whose measured 3-dB fractional bandwidth is 98.5 % (0.68–2 GHz), in-band insertion loss is less than 0.5 dB, return loss is greater than 17.5 dB, and circuit size is only 0.24 λ g × 0.02 λ g (λ g: guided wavelength at the center frequency).

Automated fiber switch with path verification enabled by an AI-powered multi-task mobile robot

As the capacity of optical transport networks undergoes significant growth, there is an ongoing discussion on how to effectively leverage both spectral and spatial degrees of freedom to scale future network capacity. This paper presents an artificial intelligence (AI)-powered multi-task robot comprising a collaborative robotic arm and a mobile robotic base designed for optical network automation. The robot demonstrates the capability of direct fiber switching, establishing static fiber links that consume zero power and have minimal insertion loss from fiber connectors. As a precautionary measure before physically switching fiber cables, the robot performs path verification by detecting robot-driven events using real-time coherent receivers, aiming to avoid accidental unplugging. Additionally, the robot showcases its mobility by efficiently navigating between different network racks and rooms while executing various tasks. Implementing the automation of network operations using robots has the potential to reduce both capital and operational expenditures.

Femtosecond-laser-inscribed cladding waveguides in KTiOPO4 crystal for second-harmonic generation and Y-branch splitters

In this study, the fabrication of straight- and Y-branch-cladding waveguides in KTiOPO4 crystals using femtosecond laser-direct writing is described. The second-harmonic generation (SHG) of green light through the cladding waveguides was realized using a pulsed-wave pump at 1,064 nm. The guiding properties of straight-cladding waveguides fabricated by varying the laser-writing conditions were investigated. The minimum insertion loss was approximately 2.0 dB at 1,064 nm. Confocal micro-Raman spectroscopy was used to investigate the lattice micro-modifications. The maximum SHG conversion efficiency of the straight-cladding waveguide reached 31.4% with a maximum output power of 79.29 mW from an input power of 252.6 mW. The performances of the Y-branch splitters with splitting angles ranging from 0.5° to 2.6° were characterized at 1,064 nm, showing excellent properties, including symmetrical output ends and approximately equal splitting ratios. An SHG conversion efficiency of 13.4% and maximum output power of 33.63 mW were achieved in the Y-branch splitter with a splitting angle of 1.0°. These findings support potential applications in constructing compact-frequency converters by using femtosecond laser-written KTiOPO4 depressed-cladding waveguides.

Multiphysics simulations of a cylindrical waveguide optical switch using phase change materials on silicon

This work presents the design and multiphysics simulation of a cylindrical waveguide-based optical switch using germanium-antimony-tellurium (GST) as an active phase change material. The innovative cylindrical architecture is theoretically analyzed and evaluated at 1550 nm wavelength for telecommunication applications. The dispersion relation is derived analytically for the first time to model the optical switch, while finite element method (FEM) and finite difference time domain (FDTD) techniques are utilized to simulate the optical modes, light propagation, and phase change dynamics. The fundamental TE01 and HE11 modes are studied in detail, enabling switching between low-loss amorphous and high-loss crystalline GST phases. Increasing the GST thickness is found to increase absorption loss in the crystalline state but also slows down phase transition kinetics, reducing switching speeds. A 10 nm GST layer results in competitive performance metrics of 0.79 dB insertion loss, 13.47 dB extinction ratio, 30 nJ average power consumption, and 3.5 Mb/s bit rate. The combined optical, thermal, and electrical simulation provides comprehensive insights towards developing integrated non-volatile photonic switches and modulators utilizing phase change materials.

Compact supermode switch for photonic matrix processing.

A 2 × 2 switch based on differential effective thermo-optic (TO) coefficients of waveguide supermodes is proposed and experimentally demonstrated as a more compact alternative to Mach-Zehnder interferometer (MZI)-based switches used in coherent photonic matrix processing networks. The total waveguide width of the device is 1.335 μm. Using a novel, to the best of our knowledge, supermode coupler with a wideband 3-dB coupling ratio, the switch was engineered to have on-off extinction ratios (ERs) ranging from 24.1 to 38.9 dB for the two output ports over a 135 nm bandwidth. Insertion losses (ILs) of less than 0.3 and 0.4 dB over the 100 nm bandwidth were measured for bar and cross transmission, respectively. The waveguide width error tolerance is +/-30 nm. The proposed device has the potential to improve the scalability of a programmable coherent mesh for matrix processing by increasing the integration density without sacrificing the overall accuracy or limiting the operational wavelength range of the mesh.

Microstrip Quasi-Elliptic Absorptive Bandpass Filter with Ultra-Wide Reflectionless Range and Compact Size

Absorptive bandpass filters (ABPFs) are highly attractive in modern microwave communication systems due to their ability to internally absorb the harmful stopband RF-power reflections. This paper reports an approach to designing quasi-elliptic ABPFs with ultra-wide reflectionless range, enhanced selectivity, and compact size. The method is realized based on a fourth-order quasi-elliptic absorptive lowpass filter (ALPF) prototype with a simplified structure. This ALPF prototype exhibits both good impedance-matching over the whole normalized frequency domain and an adjustable transmission zero close to the passband. By applying an equivalent impedance transformer model, a coupled-line-based ABPF scheme is devised from the ALPF prototype, which eliminates conventional dispersive transmission line inverters, resulting in an ultra-wide reflectionless range and a compact size. Closed-form equations are derived to support the filter synthesis. A 2.45 GHz microstrip ABPF with 30% fractional bandwidth is designed for verification. The measured minimum in-band insertion loss is 0.83 dB and the reflectionless range of return loss better than 10 dB is from DC to 12.88 GHz. Both the upper and lower stopband suppression exceed 20 dB, with the upper stopband extending up to 6.80 GHz. The upper and lower out-of-band roll-off rates are 93.9 and 121.4 dB/GHz, respectively. The overall circuit size is 0.12 λg2.

Design and fabrication of a microstrip triplexer with wide flat channels for multi-band 5G applications.

In this paper, a new microstrip triplexer is designed to work at 2.5 GHz, 4.4 GHz and 6 GHz for mid-band 5G applications. All channels are flat with three low group delays (GDs) of 0.84 ns, 0.75 ns and 0.49 ns, respectively. Compared to the previously reported works, the proposed triplexer has the minimum group delay. The designed triplexer has 18.2%, 13.7%, 23.6% fractional bandwidths (FBW%) at 2.5 GHz, 4.4 GHz and 6 GHz, respectively. The obtained insertion losses (ILs) are low at all channels. These features are obtained without a noticeable increase in the overall size. A novel and simple resonator is used to design the proposed triplexer, which includes two pairs of coupled lines combined with a shunt stub. A perfect mathematical analysis is performed to find the resonator behavior and the layout optimization. The type of shunt stub is determined mathematically. Also, the smallness or largeness of some important physical dimensions is determined using the proposed mathematical analysis. Finally, the designed triplexer is fabricated and measured, where the measurement results verify the simulations.

Bandpass Frequency Selective Surfaces with Fast Roll-off Characteristics

Abstract We propose a bandpass frequency selective surface (FSS) with fast cut-off characteristics and low insertion loss. It consists of a compact high-frequency hybrid compression board with five metal layers, two Rogers RO4003C layers, and two F4B layers. The hierarchical fitting of equivalent circuits is utilized to analyze the FSS, which maintains angular stability for dual-polarized electromagnetic waves at incidence angles of less than 20 degrees. Under normal incidence, transmission amplitudes in the K-band exceed −0.87 dB. Furthermore, the proposed FSS achieves a roll-off rate of 87.6 dB/GHz, which can be applied in dual-frequency observing systems for millimeter astronomy.

Research on Low-Insertion-Loss Packaging Materials for DC-6 GHz Attenuation Chips

Research on Low-Insertion-Loss Packaging Materials for DC-6 GHz Attenuation Chips

Femtosecond laser direct writing large-area fiber Bragg grating based on diaphragm shaping

We propose and demonstrate a new method of direct writing large-area fiber Bragg grating by femtosecond laser through the coating. By adding an adjustable diaphragm before the focusing objective, we can precisely control the length of the refractive index modulation line along the femtosecond laser incident direction up to 29.1 µm. In combination with femtosecond laser scanning fabrication technology, a uniform refractive index modulation plane can be inscribed in the fiber in a single scanning. Based on the plane-by-plane inscription method, we have fabricated a high-quality high-reflectivity fiber Bragg grating and a chirped fiber Bragg grating on 20/400 double-clad fiber core. The reflectivity of both gratings is greater than 99%, and the insertion loss is as low as 0.165 dB and 0.162 dB, respectively. The thermal slope of chirped fiber Bragg grating without any refrigeration is 0.088 °C/W and there is no obvious temperature increase when using the water cooling. Therefore, the fabrication method of large-area fiber Bragg grating based on diaphragm shaping can efficiently fabricate high-quality fiber Bragg grating in the large core diameter fiber, which has an important application prospect in high-power all-fiber oscillators, especially all-fiber oscillators in special wavebands.

Omni-polarized Faraday isolator based on non-Hermitian Faraday system

Non-Hermitian systems have recently attracted significant attention in photonics due to the realization that the interplay between gain and loss can lead to entirely new and unexpected features. Here, we propose and demonstrate a non-Hermitian Faraday system capable of non-reciprocal omni-polarizer action at the exceptional point. Notably, both forward and backward propagating light with arbitrary polarization converge to the same polarization state. Leveraging the robustness and non-reciprocity of the non-Hermitian Faraday system, we realize an omni-polarized Faraday isolator that can effectively isolate any polarized light without the need for a polarizer at the incident port of backward propagation. Remarkably, under the given parameter configuration, the isolator achieves a maximum isolation ratio of approximately 100 dB and a minimum isolation ratio of around 45 dB for various polarized light, accompanied by near-zero insertion loss. Furthermore, our research reveals the remarkable tolerance of the non-Hermitian Faraday isolator to nonlinear effects. This unique characteristic allows us to harness nonlinear effects to achieve various optical functions, all while maintaining excellent isolation performance. The proposed non-Hermitian Faraday system paves the way for the realization of magnetically or optically switchable non-reciprocal devices.

Tailorable ITO thin films for tunable microwave photonic applications

Tunability is a fundamental prerequisite for functional devices and forms the backbone of reconfigurable microwave photonic (MWP) signal processors. In this paper, we explore the use of indium tin oxide (ITO) thin films, notable for their combination of optical transparency and electrical conductivity, to provide tunability for integrated MWP devices. We study the impacts of post-thermal annealing on the structural, electrical, and optical properties of ITO films. The annealed ITO microheater maintains a low total insertion loss of just 0.1 dB while facilitating the tunability of the microring across the entire free spectral range (FSR) using less than half the voltage required by its non-annealed counterpart. Furthermore, the post-annealed ITO film exhibits a 30% improvement in response time, enhancing its performance as an active voltage-controlled microheater. Leveraging this advantage, we employed the post-annealed device to demonstrate continuous tunable radio frequency (RF) phase shifts from 0–330° across a frequency range spanning 15 GHz to 40 GHz with only 5.58 mW of power. The flexibility in modifying the ITO thin film properties effectively bridges the gap between achieving low-loss and high-speed thermo-optic based microheaters.

Design and Fabrication of a Film Bulk Acoustic Wave Filter for 3.0 GHz-3.2 GHz S-Band.

Film bulk acoustic-wave resonators (FBARs) are widely utilized in the field of radio frequency (RF) filters due to their excellent performance, such as high operation frequency and high quality. In this paper, we present the design, fabrication, and characterization of an FBAR filter for the 3.0 GHz-3.2 GHz S-band. Using a scandium-doped aluminum nitride (Sc0.2Al0.8N) film, the filter is designed through a combined acoustic-electromagnetic simulation method, and the FBAR and filter are fabricated using an eight-step lithographic process. The measured FBAR presents an effective electromechanical coupling coefficient (keff2) value up to 13.3%, and the measured filter demonstrates a -3 dB bandwidth of 115 MHz (from 3.013 GHz to 3.128 GHz), a low insertion loss of -2.4 dB, and good out-of-band rejection of -30 dB. The measured 1 dB compression point of the fabricated filter is 30.5 dBm, and the first series resonator burns out first as the input power increases. This work paves the way for research on high-power RF filters in mobile communication.

A compact, low‐loss, and wide passband ratio substrate integrated waveguide triplexer based on complementary split ring resonators for multiband applications

SummaryIn this paper, a design of a substrate‐integrated waveguide (SIW) triplexer with improved low‐loss performance, passband ratio, and compactness based on the complementary split ring resonator (CSRR) structure is presented. The proposed triplexer operates at three passbands of 6, 8, and 10 GHz that correspond to the passband ratios of 1.33 and 1.67. By appropriately designing square CSRRs on the surface of the SIW structure, the low‐loss and compact resonator filters below the cut‐off frequency of the SIW at each operation frequency can be realized. The wide passband ratio is obtainable by adjusting the dimensions of the T‐junction. The measured results show the minimum insertion losses of 1.5, 1.4, and 1.9 dB at 6, 8, and 10 GHz, respectively. In addition, the minimum measured return losses are −9.33, −11.3, and −12.4 dB at the corresponding three passbands. The measured isolation between output ports is better than −17 dB in the frequency range from 5 to 11 GHz. The measured results agree well with simulations which are conducted by the CST Microwave Studio simulator. The proposed triplexer is designed on a cost‐effective RO4003C substrate with a compact size of 35  25 mm2

An S–K Band 6-Bit Digital Step Attenuator with Ultra Low Insertion Loss and RMS Amplitude Error in 0.25 μm GaAs p-HEMT Technology

An S–K Band 6-Bit Digital Step Attenuator with Ultra Low Insertion Loss and RMS Amplitude Error in 0.25 μm GaAs p-HEMT Technology

Insert loss experiment and acoustic impedance theoretical study on the noise barrier with MPP-QRD top structure

The effective edge processing is the key to the performance of noise barrier. To prevent the sound diffraction within the low-medium frequency range, the quadratic residue diffuser (QRD) was combined with microperforated panel (MPP) in this study. The impedance of MPP with different parameters and QRD structure with N = 7 was calculated respectively and the matching degree of the composite structure was obtained. The insertion loss of noise barriers with different MPP-QRD top structures was field measured and compared to the equi-height vertical noise barrier. The results show that the degree of impedance matching between microperforated panels and quadratic residue diffusers is significantly correlated with their performance as the top structure of noise barrier. The acoustic impedance matched MPP-QRD top structure can significantly improve the insertion loss of the vertical noise barrierwith the same height. When the microperforated panel perforation is 3 %, the thickness is 0.8 mm, and the aperture is 0.6 mm, performance of the MPP-QRD structure is the best, the relative insertion loss can reach 4.07 dB.

Design and development of square stub loaded band pass filter with quality factor analysis

In this paper, a compact square stub-loaded band pass filter (BPF) is designed and investigated for quality factor improvement analysis. A detailed analysis has been presented to demonstrate the superior power handling capability of the proposed microstrip bandpass filter without any degradation in its electrical performance parameters. For this purpose, square-type stubs are incorporated in the proposed bandpass filter which reduced the maximum peak voltage and increased the high peak threshold, instead of using sharp edges. Also, an in-depth analysis of peak voltage with a center frequency of 2.1 and 4.2 have been carried out by considering some parameters like pressure and quality. The proposed bandpass filter shows minimum peak voltage of 1.61 V and 1.59 V across the frequency of 2.1 GHz and 4.2 GHz which covers the application of mobile and radio altimeters. The designed BPF shows the minimum heat generation of 0.29 and 0.89 per watt at the resonating frequencies of 2.1 and 4.2 GHz. Furthermore, the proposed bandpass filter presents an in-depth analysis of several characteristic parameters such as return loss, insertion loss, power loss, delay in group and phase, current distribution, H and E field distribution and maximum power loaded and unloaded quality factor.

On-chip integrated few-mode erbium–ytterbium co-doped waveguide amplifiers

We propose for the first time, to the best of our knowledge, an on-chip integrated few-mode erbium–ytterbium co-doped waveguide amplifier based on an 800 nm thick Si3N4 platform, which demonstrates high amplification gains and low differential modal gains (DMGs) simultaneously. An eccentric waveguide structure and a co-propagating pumping scheme are adopted to balance the gain of each mode. A hybrid mode/polarization/wavelength-division (de)multiplexer with low insertion loss and crosstalk is used for multiplexing and demultiplexing in two operation wavebands centered at 1550 nm and 980 nm, where the light in these two bands serves as the signal light and pump light of the amplifier, respectively. The results demonstrate that with an input signal power of 0.1 mW, TE0 mode pump power of 300 mW, and TE1 mode pump power of 500 mW, the three signal modes (TE0/TM0/TE1) all exhibit amplification gains exceeding 30 dB, while maintaining a DMG of less than 0.1 dB.

An Ultra-Selective OLR – based Microstrip Diplexer with Minimal Insertion Loss for Wireless Communication System

An Ultra-Selective OLR – based Microstrip Diplexer with Minimal Insertion Loss for Wireless Communication System

Band 40/41 Surface Acoustic Wave Filters on 42°YX-Lithium Tantalate Substrate with Suppression of Transverse Leakage

The transverse leakage of leaky surface acoustic waves (LSAWs) occurs on 42°YX-lithium tantalate substrates (42LT), which increases the insertion loss, narrows the bandwidth and flattens the roll-off of band 40/41 SAW filters and duplexers. In this work, LSAW characteristics with different metal materials and thicknesses are calculated by the finite element method (FEM), which determines the IDT material and thickness used for band 40/41 SAW filter design. To deeply understand transverse leakage and suppress it, the effects of different gap and dummy lengths on transverse leakage are simulated and discussed. Then, a new technique of using a wider dummy without any additional lithographic or depositing processes is proposed to suppress the leakage. Its effectiveness is validated by both simulations and experiments. Then, the technique is extended to applications of band 40 and 41 SAW filters. The experimental results show that with the wider dummy structure, the band 40 and 41 SAW filters achieve a more than 0.2 dB improvement in the insertion loss, a wider bandwidth and a steeper roll-off characteristic. This technique may also be extended to the other band SAW filter applications.